# TWIST Mount Spud

TWIST Mount EVF Spud has a special 15mm groove design that fits into the TWIST Mount EVF Knuckle and is available for various monitor and camera types.  The Spuds are also compatible with the [TWIST Ball Monitor Mount.](https://www.mid49.com/products/twist-ball) 

  

If more than the Knuckle and Spud is needed, check out the [TWIST Mount EVF Kit with Knuckle](https://www.mid49.com/products/twist-mount-evf-knuckle-with-double-sided-nato-rail-to-15mm-rod "TWIST Mount EVF Kit") which includes the Double Sided NATO Rail to 15mm Rod.

  

 **[Check out our Compatibility Chart Here.](https://www.canva.com/design/DAGeNIfJ8hs/RL--hqzPUQiNzg1xM5sQeQ/view?utm_content=DAGeNIfJ8hs&utm_campaign=designshare&utm_medium=link2&utm_source=uniquelinks&utlId=h6ce6fdb5ea)**

  

-   **TWIST Mount Spud with ARRI 1/4-20**
    -   Works with Blackmagic Design PYXIS Monitor
    -   Works with recent SmallHD monitors like Indie 5, Cine 5, and Ultra 5
    -   Works with ARRI Camera Control Monitor CCM-1  
        
-   **TWIST Mount Spud with ARRI 3/8-16**  
    -   Works with Atomos Shogun Ultra Monitor-Recorder (ATOMSHG002)
-   **TWIST Mount Spud with Old-Style SmallHD 1/4-20**  
    -   Works with legacy 5" SmallHD monitors like 501, 502, Focus 5, Focus Bolt, Action 5  
        
    -   Works with legacy 7" SmallHD monitors like 701, 702, Focus 7, Cine 7, Indie 7
-   **TWIST Mount Spud for Canon C400, C300mkIII, C500mkII, LM-V2**
    -   Works with Canon C400, C300mkIII, C500mkII, LM-V2, and LM-V1.
-   **TWIST Mount Spud with ARRI M6 Rosette**  
    -   Works with Z CAM 2.89" EVF101
    -   Works with original PORTKEYS OEYE
-   **TWIST Mount Spud with Sony / PortKeys 1/4-20**  
    -   Works with Sony Burano directly and also the [EVF Pivot Adapter](https://www.mid49.com/products/sony-burano-evf-pivot-adaptor "Sony Burano EVF Pivot Adapter")  
        
    -   Works with PORTKEYS LH7P (be careful, the monitor is plastic)  
        Works with PORTKEYS 5” BM5 IV
-   **TWIST Mount Spud with L Bracket 1/4-20**  
    -   Includes the L Bracket with two 1/4-20 screws  
        
    -   Works with PORTKEYS LEYE III (note their HDMI cable may conflict with NATO rail in certain positions)  
        
    -   Works with original RED DSMC1 EVF  
        
    -   This can also be used in combination with the Knuckle to mount wireless transmitters and other accessories to a NATO rail  
        
-   **TWIST Mount Spud with Female ARRI 1/4-20**  
    -   Works with any 1/4-20 product including those with ARRI spaced locating pins (3mm diameter pin on 10.4mm spacing center to center)  
        
-   **TWIST Mount Spud with Female ARRI 3/8-16**  
    -   Works with any 3/8-16 product including those with ARRI spaced locating pins (3mm diameter pin on 15mm spacing center to center)  
        
-   **TWIST Mount Spud for 1/4-20 Rosette**
    -   Works with 1/4-20 Rosette on the Kinefinity EAGLE SDI (or HDMI) e-Viewfinder  
        
    -   Works with Zacuto Gratical, Gratical Eye, and Kameleon Pro EVF
    -   This is NOT a regular ARRI rosette  
        
-   **TWIST Mount Spud for ARRI Viewfinder Wedge**
    -   Works with ARRI standard EVF wedge products like EVF-1, EVF-2, MVF-1, MVF-2  
        
    -   Works with other ARRI wedge adapters like ARRI VFA-4, K2.0015520, etc.  
        
    -   Works with 3rd party products that utilize ARRI-style mounting wedges.
-   **TWIST Mount Spud for Blackmagic Viewfinder Wedge**  
    -   Works with URSA Cine EVF - CINEURSAB/EVF  
        
    -   Works with URSA Cine EVF Extension - CINEURSAB/EVFEXT  
        
    -   Works with PYXIS Monitor Kit - CINEURSABB/AMKIT
-   **TWIST Mount Spud for Sony Venice Viewfinder Wedge (DVF-EL200)**
    -   Works with Sony Venice Viewfinder Wedge (DVF-EL200)
-   **TWIST Mount Spud for Sony FX6**
    -   Attaches to the FX6 monitor to provide a rigid "flop stop" mount
    -   Monitor folding capability is maintained
-   **TWIST Mount Monitor Right Angle Adapter + Spud with Old-Style SmallHD 1/4-20**
    -   TWIST Mount Monitor Right Angle Spud Adapter allows monitors with top and bottom mounting points to be adapted to the TWIST Mount System.
    -   Older version SmallHD monitors where locating pins are short and wide
    -   Works with SmallHD Focus 5, Focus Pro for RED, 502, 503, Action 5
    -   Works with SmallHD AC7, Indie 7, 702, 703, Cine 7
-   **TWIST Mount Monitor Right Angle Adapter + Spud with ARRI 1/4-20**
    -   TWIST Mount Monitor Right Angle Spud Adapter allows monitors with top and bottom mounting points to be adapted to the TWIST Mount System.
    -   Works with Blackmagic Video Assist (remove locating pins)
    -   Works with Atomos Shinobi, Ninja, Shogun (remove locating pins)
    -   Works with recent SmallHD monitors like Indie 5, Cine 5, and Ultra 5
    -   Works with TVLogic F-5A, F-7H, F-7HS (remove locating pins)
-   **TWIST Mount Monitor Right Angle Adapter + Spud with ARRI 3/8-16**
    -   TWIST Mount Monitor Right Angle Spud Adapter allows monitors with top and bottom mounting points to be adapted to the TWIST Mount System.
    -   Works with Atomos Shogun Monitor-Recorder (ATOMSHG002)
-   **TWIST Mount Monitor Right Angle Adapter + Spud with Sony / PortKeys 1/4-20**
    -   Works with PORTKEYS BM5 IV, BM5 IV WR, LH5P II
    -   Works with PORTKEYS PT5 II, PT6
    -   Works with PORTKEYS LH7P, LH7H, HD7H
    -   Works with PORTKEYS BM7 II DS U, HS8

**The below TWIST Mount Spuds are specifically designed for the  [TWIST Ball Monitor Mount](https://www.mid49.com/products/twist-ball) and are also sold separately. Check out the [TWIST Ball Compatibility Chart here.](https://www.canva.com/design/DAGigzPJ3QU/x1fsEiYx4LcBz03YOr9INw/view?utm_content=DAGigzPJ3QU&utm_campaign=designshare&utm_medium=link2&utm_source=uniquelinks&utlId=ha5998114e2)**

-   **TWIST Mount Spud for Action Cameras (GoPro, DJI Osmo Action, Insta360)**
    -   Standard receptacle for 2-prong action camera feet
    -   Works with GoPro, DJI Osmo Action, Insta360
    -   Works with many other 3rd party action camera products
-   **TWIST Mount Spud with Male Hot Shoe**  
    -   Clamps to standard camera shoe mounts
-   **TWIST Mount Spud with Female Hot Shoe**  
    -   Female shoe receptacle for standard shoe accessories
-   **TWIST Mount Spud with NATO Rail**  
    -   Standard NATO rail with safety pins on each end
    -   Mounting area between pins is 30mm
-   **TWIST Mount Spud with NATO Clamp**  
    -   Standard NATO clamp with ratcheting thumbscrew
    -   Clamping area between outside edges 21mm
-   **TWIST Mount Spud with Tripod Expansion Adapter**  
    -   Includes a 5mm locating pin and 1/4-20 screw for attaching small cameras with a standard "tripod" mount
    -   Remove the locating pin and screw this adapter into any two 1/4-20 threaded holes between 16.5 and 33mm center to center
    -   Threaded ARRI 1/4-20 and 3/8-16 holes also available

**  
TWIST Mount EVF Spud for Canon C300mkIII, C500mkII, LM-V2 Dimensions**  
**Product Weight:** 0.78oz (22g)  
**Product Dimensions (WxLxH):** 0.9 x 2.9 x 0.9in (22 x 73 x 23mm)  
  
**TWIST Mount EVF Spud with ARRI M6 Rosette Dimensions  
Product Weight:** 0.4oz (12g)**Product Dimensions (WxLxH):** 1.3 x 1.3 x 0.8in (32 x 32 x 19mm)  
  
**TWIST Mount EVF Spud with ARRI 1/4-20 Dimensions  
Product Weight:** 0.4oz (10g)**Product Dimensions (WxLxH):** 0.8 x 0.8 x 0.75in (20 x 20 x 19mm)  
  
**TWIST Mount EVF Spud with ARRI 3/8-16 Dimensions  
Product Weight:** 0.4oz (12g)**Product Dimensions (WxLxH):** 0.8 x 0.8 x 0.8in (20 x 20 x 21mm)  
  
**TWIST Mount EVF Spud with Sony 1/4-20 Dimensions  
Product Weight:** 0.3oz (8g)**Product Dimensions (WxLxH):** 0.7 x 0.7 x 0.8in (17 x 17 x 19mm)  
  
**TWIST Mount EVF Spud with L Bracket 1/4-20 Dimensions  
Product Weight:** 0.6oz (18g)**Product Dimensions (WxLxH):** 0.8 x 2.5 x 0.8in (20 x 63 x 19mm)  
  
**TWIST Mount EVF Spud with Female ARRI 1/4-20 Dimensions  
Product Weight:** 0.4oz (10g)**Product Dimensions (WxLxH):** 0.8 x 0.8 x 0.8in (20 x 20 x 19mm)  
  
**TWIST Mount EVF Spud with Female ARRI 3/8-16 Dimensions  
Product Weight:** 0.3oz (8g)**Product Dimensions (WxLxH):** 0.8 x 0.8 x 0.8in (20 x 20 x 19mm)

## Details

- **Price:** 20.0 USD - 74.0 USD
- **Vendor:** MID49
- **Type:** EVF

## Variants

| Variant | Price | Available |
|---------|-------|-----------|
| TWIST Mount Spud with ARRI 1/4-20 | 25.00 USD | In stock |
| TWIST Mount Spud with ARRI 3/8-16 | 25.00 USD | In stock |
| TWIST Mount Spud with Old-Style SmallHD 1/4-20 | 25.00 USD | In stock |
| TWIST Mount Spud for Canon C300mkIII, C500mkII, LM-V2 | 35.00 USD | In stock |
| TWIST Mount Spud with ARRI M6 Rosette | 35.00 USD | In stock |
| TWIST Mount Spud with Sony / PortKeys 1/4-20 | 25.00 USD | In stock |
| TWIST Mount Spud with L Bracket 1/4-20 | 35.00 USD | In stock |
| TWIST Mount Spud with Female ARRI 1/4-20 | 20.00 USD | In stock |
| TWIST Mount Spud with Female ARRI 3/8-16 | 20.00 USD | In stock |
| TWIST Mount Spud for 1/4-20 Rosette (Kinefinity EAGLE SDI e-Viewfinder) | 35.00 USD | In stock |
| TWIST Mount Spud for ARRI Viewfinder Wedge | 35.00 USD | In stock |
| TWIST Mount Spud for Blackmagic Viewfinder Wedge | 35.00 USD | In stock |
| TWIST Mount Spud for Sony Venice Viewfinder Wedge (DVF-EL200) | 35.00 USD | In stock |
| TWIST Mount Spud for Sony FX6 | 49.00 USD | In stock |
| TWIST Mount Monitor Right Angle Adapter + Spud with ARRI 1/4-20 | 74.00 USD | In stock |
| TWIST Mount Monitor Right Angle Adapter + Spud with ARRI 3/8-16 | 74.00 USD | In stock |
| TWIST Mount Monitor Right Angle Adapter + Spud with Old-Style SmallHD 1/4-20 | 74.00 USD | In stock |
| TWIST Mount Monitor Right Angle Adapter + Spud with Sony / PortKeys 1/4-20 | 74.00 USD | In stock |
| TWIST Mount Spud for Action Cameras (GoPro/DJI OSmo Action/Insta360) | 35.00 USD | In stock |
| TWIST Mount Spud with Male Hot Shoe | 35.00 USD | In stock |
| TWIST Mount Spud with Female Hot Shoe | 35.00 USD | In stock |
| TWIST Mount Spud with NATO Rail | 39.00 USD | In stock |
| TWIST Mount Spud with NATO Clamp | 49.00 USD | In stock |
| TWIST Mount Spud with Tripod Expansion Adapter | 35.00 USD | In stock |

## Images

- TWIST Mount Spud
- TWIST Mount Spud
- TWIST Mount Spud
- TWIST Mount Spud
- TWIST Mount Spud
- TWIST Mount Spud
- TWIST Mount Spud
- TWIST Mount Spud
- TWIST Mount Spud
- TWIST Mount Spud

---

> Source: [MID49](https://www.mid49.com/products/twist-mount-evf-spud)
> Updated: 2026-05-29