# Power Distribution Box DB-15 (Sony FX5, Gold Mount, Rod Mounted)

**_Available for pre-order, ships in late September 2026  
_**  
Power Distribution Box DB-15 (Sony FX5, Gold Mount, Rod Mounted) attaches to two 15mm LW rods and includes a friction hinge, so the DB-15 can tilt forward and backward.

DB-15 is an intelligent power distribution module that powers the camera using a USB-C Multi-Voltage output capable of 5, 9, 12, and 15V. When the FX5 is connected, it receives 9V, and the camera's internal NP-SA100 battery charges.

When the REMOTE cable is installed in the camera's lower USB-C port, ARRI standard triggering over 3pin Fischers is possible.

Accessory power outputs include 2x D-Taps, 5V USB-C PD, 2x 3pin Fischers, and 2x 2pin LEMO-compatible connectors.

Hot-swap between on-board battery and 4pin XLR DC INPUT without losing camera or accessory power. When both sources are connected, the DC INPUT takes priority down to 12.5V at which point, the DB-15 will switch to an onboard battery.

With the SMART FUSE design, camera power is monitored, and the remaining power budget is allocated to accessories. For example, the FX5 uses approximately 1.0A at 14V, so when using a 10A capable battery, the remaining 9.0A is allocated for accessory use. If an accessory configuration exceeds the 9.0A limit, accessory power is cut off, leaving the camera powered. The "SMART FUSE" LED will illuminate to show the error. Once the accessory configuration is adjusted to below 9.0A, press the RESET button to re-enable power to the accessory outputs.

In the event of a complete short circuit, the system will immediately shut down and can only be turned back on once the short circuit has been removed.  
  
[Also available in Cage Mounted version.](https://www.mid49.com/products/power-distribution-box-db-15-sony-fx5-gold-mount-cage-mounted)

**INPUTS**  
BATT     Gold Mount plate  
DC IN     4pin XLR (11-17V)

**CAMERA OUTPUTS**  
1x USB-C PD Multi-Voltage (5, 9, 12, 15V)  
1x Remote Port (2.5mm TRRS)  
  
**ACCESSORY OUTPUTS**  
2x D-Tap (battery voltage)  
2x 3pin (24V at 2.5A with run/stop)  
2x 2pin (battery voltage)  
1x USB-C PD (5V at 3A with thread lock)

The battery plate can be swapped from Gold Mount to V-Mount using the [DB Replacement Power Plate (V-Mount)](https://www.mid49.com/products/db-replacement-power-plate-v-mount "DB Replacement Power Plate (V-Mount)").

[Also available in a V-Mount version!](https://www.mid49.com/products/power-distribution-box-db-15-sony-fx5-v-mount "Also available in a V-Mount version!")

**Product Weight:** 13.6oz (385g)

## Details

- **Price:** 950.0 USD
- **Vendor:** MID49
- **Type:** Power
- **Tags:** power-distribution

## Variants

| Variant | Price | Available |
|---------|-------|-----------|
| Default Title | 950.00 USD | In stock |

## Images

- Power Distribution Box DB-15 (Sony FX5, Gold Mount, Rod Mounted)
- Power Distribution Box DB-15 (Sony FX5, Gold Mount, Rod Mounted)
- Power Distribution Box DB-15 (Sony FX5, Gold Mount, Rod Mounted)
- Power Distribution Box DB-15 (Sony FX5, Gold Mount, Rod Mounted)
- Power Distribution Box DB-15 (Sony FX5, Gold Mount, Rod Mounted)
- Power Distribution Box DB-15 (Sony FX5, Gold Mount, Rod Mounted)
- Power Distribution Box DB-15 (Sony FX5, Gold Mount, Rod Mounted)
- Power Distribution Box DB-15 (Sony FX5, Gold Mount, Rod Mounted)

## Additional Information

- **Google: Label 3 (Core Feature):** Hot-swap between onboard battery and DC input with zero power interruption
- **Camera Brand:** Sony
- **Compatible Camera:** Sony FX5
- **Product rating:** 5.0/5.0

---

> Source: [MID49](https://www.mid49.com/products/power-distribution-box-db-15-sony-fx5-gold-mount)
> Updated: 2026-09-14