# TWIST Mount EVF Knuckle TWIST Mount EVF Knuckle has a NATO clamp on one end and a variable friction 15mm mount on the other. With the variable friction design, you can grab and twist the monitor without loosening the thumbscrew. Available as a Knuckle Only or as a Kit for various monitor and camera types. If more than the Knuckle and Spud is needed, check out the [TWIST Mount EVF Kit with Knuckle](https://www.mid49.com/products/twist-mount-evf-knuckle-with-double-sided-nato-rail-to-15mm-rod "TWIST Mount EVF Kit") which includes the Double Sided NATO Rail to 15mm Rod. **[Check out our Compatibility Chart Here.](https://www.canva.com/design/DAGeNIfJ8hs/RL--hqzPUQiNzg1xM5sQeQ/view?utm_content=DAGeNIfJ8hs&utm_campaign=designshare&utm_medium=link2&utm_source=uniquelinks&utlId=h6ce6fdb5ea)** - **TWIST Mount EVF Knuckle Only** - Includes just the Knuckle portion described above - **TWIST Mount EVF Knuckle and Spud for Canon C400, C300mkIII, C500mkII, LM-V2** - Includes the Knuckle and Canon Monitor Spud - Works with Canon C400, C300mkIII, C500mkII, LM-V2, and LM-V1. - **TWIST Mount EVF Knuckle with ARRI M6 Rosette** - Includes the Knuckle and male ARRI M6 Rosette Spud - Works with Z CAM 2.89" EVF101 - Works with original PORTKEYS OEYE - **TWIST Mount EVF Knuckle with ARRI 1/4-20** - Includes the Knuckle and male ARRI 1/4-20 Spud - Works with Blackmagic Design PYXIS Monitor - Works with recent SmallHD monitors like Indie 5, Cine 5, and Ultra 5 - Works with ARRI Camera Control Monitor CCM-1 - **TWIST Mount EVF Knuckle with ARRI 3/8-16** - Includes the Knuckle and male ARRI 3/8-16 Spud - Works with Atomos Shogun Ultra Monitor-Recorder (ATOMSHG002) - **TWIST Mount EVF Knuckle with Sony / PortKeys 1/4-20**  - Includes the Knuckle and male Sony 1/4-20 Spud - Works with Sony Burano directly and also the [EVF Pivot Adapter](https://www.mid49.com/products/sony-burano-evf-pivot-adaptor "Sony Burano EVF Pivot Adapter") - Works with PORTKEYS LH7P (be careful, the monitor is plastic) - Works with PORTKEYS 5” BM5 IV - **TWIST Mount EVF Knuckle with L Bracket 1/4-20**  - Includes the Knuckle and L Bracket with 1/4-20 screws - Works with PORTKEYS LEYE III (note their HDMI cable may conflict with NATO rail in certain positions) - Works with original RED DSMC1 EVF - This can also be used to mount wireless transmitters like Teradek, DJI Transmission, and other accessories to a NATO rail - **TWIST Mount EVF Knuckle with Female ARRI 1/4-20**  - Includes the Knuckle and female ARRI 1/4-20 Spud - Works with any 1/4-20 product, including those with ARRI spaced locating pins (3mm diameter pin on 10.4mm spacing center to center) - **TWIST Mount EVF Knuckle with Female ARRI 3/8-16**  - Includes the Knuckle and female ARRI 1/4-20 Spud - Works with any 3/8-16 product including those with ARRI spaced locating pins (3mm diameter pin on 15mm spacing center to center) - **TWIST Mount EVF Knuckle and Spud for 1/4-20 Rosette** - Includes the Knuckle and male 1/4-20 Rosette Spud - Works with 1/4-20 Rosette on the Kinefinity EAGLE SDI (or HDMI) e-Viewfinder - Works with Zacuto Gratical, Gratical Eye, and Kameleon Pro EVF - This is NOT a regular ARRI rosette - **TWIST Mount EVF Knuckle and Spud for ARRI Viewfinder Wedge** - Includes the Knuckle and male ARRI M6 Rosette Spud - Works with ARRI standard EVF wedge products like EVF-1, EVF-2, MVF-1, MVF-2 - Works with other ARRI wedge adapters like ARRI VFA-4, K2.0015520, etc. - Works with 3rd party products that utilize ARRI-style mounting wedges. - **TWIST Mount EVF Knuckle and Spud with Old-Style SmallHD 1/4-20** - Includes the Knuckle and spud for older style SmallHD 1/4-20 with wide locating tabs - Works with legacy 5" SmallHD monitors like 501, 502, Focus 5, Focus Bolt, Action 5 - Works with legacy 7" SmallHD monitors like 701, 702, Focus 7, Cine 7, Indie 7 - **TWIST Mount EVF Knuckle and Spud for Blackmagic Viewfinder Wedge** - Includes the Knuckle and spud for Blackmagic Design dovetail wedges - Works with URSA Cine EVF - CINEURSAB/EVF - Works with URSA Cine EVF Extension - CINEURSAB/EVFEXT - Works with PYXIS Monitor Kit - CINEURSABB/AMKIT - **TWIST Mount EVF Knuckle and Spud for Sony Viewfinder Wedge** - Includes the Knuckle and spud for Sony dovetail wedges - Works with Sony Venice Viewfinder Wedge (DVF-EL200) - **TWIST Mount EVF Knuckle and Spud for Sony FX6** - Includes the Knuckle and spud for Sony FX6 - Attaches to the FX6 monitor to provide a rigid "flop stop" mount - Monitor folding capability is maintained - **TWIST Mount Knuckle with Monitor Right Angle Adapter + Spud with Old-Style SmallHD 1/4-20** - Includes the Knuckle, Right Angle Spud Adapter, and Old-Style SmallHD 1/4-20 Spud - Older version SmallHD monitors where locating pins are short and wide - Works with SmallHD Focus 5, Focus Pro for RED, 502, 503, Action 5 - Works with SmallHD AC7, Indie 7, 702, 703, Cine 7 - **TWIST Mount Knuckle with Monitor Right Angle Adapter + Spud with ARRI 1/4-20** - Includes the Knuckle, Right Angle Spud Adapter, and ARRI 1/4-20 Spud - Works with Blackmagic Video Assist (remove locating pins) - Works with Atomos Shinobi, Ninja, Shogun (remove locating pins) - Works with recent SmallHD monitors like Indie 5, Cine 5, and Ultra 5 - Works with TVLogic F-5A, F-7H, F-7HS (remove locating pins) - **TWIST Mount Knuckle with Monitor Right Angle Adapter + Spud with ARRI 3/8-16** - Includes the Knuckle, Right Angle Spud Adapter, and ARRI 3/8-16 Spud - Works with Atomos Shogun Monitor-Recorder (ATOMSHG002) - **TWIST Mount Knuckle with Monitor Right Angle Adapter + Spud with Sony / PortKeys 1/4-20** - Works with PORTKEYS BM5 IV, BM5 IV WR, LH5P II - Works with PORTKEYS PT5 II, PT6 - Works with PORTKEYS LH7P, LH7H, HD7H - Works with PORTKEYS BM7 II DS U, HS8 - **TWIST Mount EVF Knuckle Combo Kit**  - Includes the Knuckle and ARRI M6 Rosette, ARRI 1/4-20, ARRI 3/8-16, L Bracket 1/4-20, Female ARRI 1/4-20, Female ARRI 3/8-16 - Note this does not include the specific Canon, Sony, Blackmagic, ARRI dovetail wedge, Kinefinity, and old SmallHD attachments **TWIST Mount EVF Knuckle Only Dimensions (See Spud page for Spud Dimensions)** **Product Weight:** 1.1oz (30g) **Product Dimensions (WxLxH):** 1.1 x 2.8 x 0.6in (27 x 72 x 14mm) ## Details - **Price:** 95.0 USD - 220.0 USD - **Vendor:** MID49 - **Type:** EVF ## Variants | Variant | Price | Available | |---------|-------|-----------| | TWIST Mount EVF Knuckle Only | 95.00 USD | In stock | | TWIST Mount EVF Knuckle and Spud for Canon C400, C300mkIII, C500mkII, LM-V2 | 120.00 USD | In stock | | TWIST Mount EVF Knuckle and Spud with ARRI M6 Rosette | 120.00 USD | In stock | | TWIST Mount EVF Knuckle and Spud with ARRI 1/4-20 | 110.00 USD | In stock | | TWIST Mount EVF Knuckle and Spud with ARRI 3/8-16 | 110.00 USD | In stock | | TWIST Mount EVF Knuckle and Spud with Sony / PortKeys 1/4-20 | 110.00 USD | In stock | | TWIST Mount EVF Knuckle and Spud with L Bracket 1/4-20 | 120.00 USD | In stock | | TWIST Mount EVF Knuckle and Spud with Female ARRI 1/4-20 | 105.00 USD | In stock | | TWIST Mount EVF Knuckle and Spud with Female ARRI 3/8-16 | 105.00 USD | In stock | | TWIST Mount EVF Knuckle and Spud for 1/4-20 Rosette (Kinefinity EAGLE SDI e-Viewfinder) | 120.00 USD | In stock | | TWIST Mount EVF Knuckle and Spud for ARRI Viewfinder Wedge | 120.00 USD | In stock | | TWIST Mount EVF Knuckle and Spud with Old-Style SmallHD 1/4-20 | 110.00 USD | In stock | | TWIST Mount EVF Knuckle and Spud for Blackmagic Viewfinder Wedge | 120.00 USD | In stock | | TWIST Mount EVF Knuckle and Spud for Sony Venice Viewfinder Wedge (DVF-EL200) | 120.00 USD | In stock | | TWIST Mount EVF Knuckle and Spud for Sony FX6 | 135.00 USD | In stock | | TWIST Mount Knuckle with Monitor Right Angle Adapter + Spud with Old-Style SmallHD 1/4-20 | 159.00 USD | In stock | | TWIST Mount Knuckle with Monitor Right Angle Adapter + Spud with ARRI 1/4-20 | 159.00 USD | In stock | | TWIST Mount Knuckle with Monitor Right Angle Adapter + Spud with ARRI 3/8-16 | 159.00 USD | In stock | | TWIST Mount Knuckle with Monitor Right Angle Adapter + Spud with Sony / PortKeys 1/4-20 | 159.00 USD | In stock | | TWIST Mount EVF Knuckle and Spud Combo Kit | 220.00 USD | In stock | ## Images - TWIST Mount EVF Knuckle - TWIST Mount EVF Knuckle - TWIST Mount EVF Knuckle - TWIST Mount EVF Knuckle - TWIST Mount EVF Knuckle - TWIST Mount EVF Knuckle - TWIST Mount EVF Knuckle - TWIST Mount EVF Knuckle - TWIST Mount EVF Knuckle - TWIST Mount EVF Knuckle ## Additional Information - **Google: Label 3 (Core Feature):** Grab and reposition your EVF without loosening any thumbscrew. - **Compatible Camera:** All Cameras --- > Source: [MID49](https://www.mid49.com/products/twist-mount-evf-knuckle) > Updated: 2026-07-08